£3,000.00 Inc VAT
2 x 18″ Dual Driver Subwoofer
The loudspeaker shall be a subwoofer consisting of two 18” reflex-loaded, long-excursion, low frequency transducers. The on-axis frequency response shall be 35Hz-150kHz +/- 3dB and the loudspeaker shall produce a maximum SPL of 144dB peak calculated at 1 metre.
Power handling shall be 2000W AES, 8000W peak. Rated impedance shall be 8 ohms per driver. The rear connector panel shall be fitted with two NL4 type connectors and the loudspeaker shall be operated in conjunction with a dedicated controller amplifier.
The loudspeaker enclosure shall be constructed from multi-laminate plywood with a durable polyurea coating. The drivers shall be protected by a perforated Zintec grille and the enclosure shall be fitted with bar handles, skids and flying inserts.
Finished in black (RAL9005) or white (RAL9016) as standard
|TYPE||Dual-driver, direct radiating subwoofer|
|FREQUENCY RESPONSE||35Hz – 150Hz ±3dB,|
-10dB @ 30Hz
|DRIVER||2 x 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone|
|RATED POWER||2000W AES, 8000W peak|
|NOMINAL IMPEDANCE||2 x 8Ω|
|DISPERSION (-6DB)||Omnidirectional/or Cardioid (paired)|
|ENCLOSURE||Multi-laminate birch/poplar ply|
|FINISH||Durable Polyurea Coating|
|PROTECTIVE GRILLE||Black perforated Zintec|
|CONNECTORS||2 x NL4 type|
|PIN CONNECTIONS (INPUT)||LF1: 1+, 1- LF2: 2+, 2-|
|PINS CONNECTIONS (LINK)||LF1: 1+, 1- LF2: 2+, 2-|
|DIMENSIONS (INCL SKIDS)|