Communicating in harmony: when the settings on the receiver are changed, the components adjust to each other automatically with one push of the front panel sync button. The bodypack transmitter is equipped with charging contacts for the optional BA2015 rechargeable battery.
The inconspicuous omni-directional ME-2 clip-on microphone is optimized for best reproducing the sound of the human voice and provides supreme speech intelligibility.
If you do intend to run on Channel 38 you will require a licence from Ofcom. Operating on Channel 70 will not require a licence.
1 EM 300 G3 rack-mount receiver
1 SK 300 G3 bodypack transmitter
1 ME 2 clip-on microphone (omni-directional)
1 GA 3 rack mount
1 NT 2 power supply unit
2 AA batteries
NOTE: If using rechargeable batteries we recommend Nickel Metal Hydride (NiMH) type.
RF frequency range 516….. 865 MHz
Transmission/receiving frequencies 1680
Switching bandwidth 42 MHz
Peak deviation /- 48 kHz
Frequency response (microphone) 80…..18000 Hz
Signal-to-noise ratio > 115 dB(A)
THD, total harmonic distortion < 0,9 %
In compliance with ETS 300422 , ETS 300445 , CE , FCC
Antenna connector 2 BNC, 50 Ohm
Audio-XLR connector 6,3 mm
Audio output level (balanced) XLR: 18 dBu max
Audio output level (unbalanced) Jack: 12 dBu max
Dimensions (Receiver) 212 x 202 x 43 mm
Weight (Receiver) 980 g
RF output power 10/30 mW
Operating time (transmitter) > 8 h
Input voltage range 1,8 V, line
Input voltage range 2,4 V, line
Dimensions (Transmitter) 82 x 64 x 24 mm
Weight (Transmitter) ~ 160 g
Transducer; Microphone type elektret
AF sensitivity 20 mV/Pa
Sound pressure level (SPL) 130 dB(SPL) max.
Pick-up pattern omni- directional