The TP-9 and TP-10 are a twisted pair transmitter and receiver set for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.
Bandwidth – > 70MHz (-3db)
Audio – S/PDIF or unbalanced analog
IR Repeater – 2 IR emitter Outputs (TP-9) & 1 sensor (TP-10)
Twisted Pair Input/Outputs – RJ-45 connector
System Range – up to 100 meters (320′)
Cable – UTP (unshielded twisted pair) such as CAT 5.
Level (Gain) & EQ (Peaking) Controls – TP-10
Compact Size – Part of the Kramer TOOLST family of compact, high quality and cost effective solutions

INPUTS: 1 RJ-45 CAT-5 shielded connector (LINE IN) 
OUTPUTS: 1 composite video 1Vpp/75O on a BNC connector; 1 s-Video 1Vpp/75O [Y], 0.3Vpp/75O [C] on a 4p connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) MAX. OUTPUT LEVEL: VIDEO: 2.6V; AUDIO: 4.6Vpp 
BANDWIDTH: VIDEO: >=70MHz/-3dB; AUDIO: 20Hz to 20kHz/0.1dB 
NON-LINEARITY: DIFF. GAIN: DIFF. PHASE: 0.09Deg 
S/N RATIO: VIDEO: >75dB RMS/5MHz weighted; AUDIO: >73dB 
AUDIO CONVERSION SAMPLE RATE: 48kHz 
AUDIO CONVERSION RESOLUTION: 24 bits 
POWER SOURCE: 12VDC, 82mA 
DIMENSIONS: 12cm x 6.95cm x 2.76cm (4.7″ x 2.8″ x 1.08″) W, D, H 
ACCESSORIES: Power Supply, 3.5mm to IR Emitter Control Cable (C-A35/IRE-10) 
Applications 

Studios, airports, offices and hospitals 
ecurity and military applications 
NOTE: The TP-10 Requires the TP-9 to operate

Brand

Kramer