£319.00 Inc VAT
576.2 mm (22.69″) 90º pickup MicroLine Condenser Gooseneck Microphone
Equipped with Audio-Technica’s legendary electro-acoustic design innovations, the ES915ML is ideal for applications where quality sound and flexible performance are imperative. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance.
The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES915ML also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone’s low-profile element provides a uniform MicroLine polar pattern with 90º acceptance angle.
The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.
RoHS compliant – free from all substances specified in the EU directive on hazardous substances
The ES915ML is available in the following models and lengths: ES915ML12: 423.8 mm (16.69″) ES915ML18: 576.2 mm (22.69″) ES915ML21: 652.4 mm (25.69″)
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: MicroLine®
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 109 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 4 mA typical
Switch: Flat, roll-off
Weight: ES915ML12: 129 g (4.6 oz) ES915ML18: 139 g (4.9 oz) ES915ML21: 144 g (5.1 oz)
Dimensions: ES915ML12: 423.8 mm (16.69″) long ES915ML18: 576.2 mm (22.69″) long ES915ML21: 652.4 mm (25.69″) long All: 8.0 mm (0.33″) head diameter, 18.9 mm (0.74″) base diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8138 MicroLine foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8″-27 to 3/8″-16 threaded adapter