Gooseneck Condenser Mic with integrated 3 pin XLR connector
- 197.3mm length, flexible arm
- Ideal for lecterns, pulpits and desktop speech pickup
- Mic capsule with Cardioid pickup pattern
- ‘UniGuard’ radio interference immunity (from mobile phones etc)
- Requires Phantom Power
This super-compact, small-diameter gooseneck delivers flexible positioning with a sleek, low-profile appearance. The mic’s low-profile element provides a uniform cardioid polar pattern with 120 degree acceptance angle. It is equipped with an 80 Hz low-cut UniSteep’ filter that reduces pickup of low-frequency ambient noise. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard’ innovations.
- Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
- Low-profile element provides uniform cardioid polar pattern with 120 degree acceptance angle
- Unobtrusive design with an overall length of only 7.77″ (197.3 mm)
- Plugs into any standard XLRF-type connector, or direct mounts to 5/8″-27 stands using included thread-mount adapter
- Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
- Available interchangeable elements permit angle of acceptance from 90 to 360 degrees
- Small-diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance
- Superior off-axis rejection for maximum gain before feedback
- Requires 11V to 52V DC phantom power
- UniGuard’ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
- Integral UniSteep’ filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
- RoHS compliant – free from all substances specified in the EU directive on hazardous substances
Accessories
AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8″-27 to 3/8″-16 threaded adapter
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 109 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 4 mA typical
Switch: Flat, roll-off
Weight: 104 g (3.7 oz)
Dimensions: 197.3 mm (7.77″) long, 8.4 mm (0.33″) head diameter, 18.9 mm (0.74″) base diameter
Output Connector: Integral 3-pin XLRM-type
- Element: Fixed-charge back plate, permanently polarized condenser
- Polar Pattern: Cardioid
- Frequency Response: 30-20,000 Hz
- Low Frequency Roll Off: 80 Hz, 18 dB/octave
- Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
- Impedance: 250 ohms
- Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
- Dynamic Range: 109 dB, 1 kHz at Max SPL
- Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
- Phantom Power Requiremens: 11-52V DC, 4 mA typical
- Weight: ES915SC12: 125 g (4.4 oz) ES915SC18: 135 g (4.8 oz) ES915SC21: 140 g (4.9 oz)
- Dimensions: ES915SC12: 304.8 mm (12.00″) long ES915SC18: 457.2 mm (18.00″) long ES915SC21: 533.4 mm (21.00″) long All: 8.4 mm (0.33″) head diameter, 18.9 mm (0.74″) base diameter
- Output Connector: Integral 3-pin XLRM-type
- Accessories: AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8″-27 to 3/8″-16 threaded adapter
You must be logged in to post a review.
Reviews
There are no reviews yet.