This super-compact, small-diameter gooseneck delivers flexible positioning with a sleek, low-profile appearance. The mic’s low-profile element provides a uniform MicroLine polar pattern with narrow 90? acceptance angle. It is equipped with an 80 Hz low-cut UniSteep’ filter that reduces pickup of low-frequency ambient noise and a mute switch with an LED that lights when the mic is on. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard’ innovations.
Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
Mute switch in base lights to indicate operational status of the microphone
Low-profile element provides uniform MicroLine polar pattern with narrow 90? acceptance angle
Unobtrusive design with an overall length of only 12.45″ (316.3 mm)
Plugs into any standard XLRF-type connector, or direct mounts to 5/8″-27 stands using included thread-mount adapter
Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
Available interchangeable elements permit angle of acceptance from 90? to 360?
Superior off-axis rejection for maximum gain before feedback
Requires 11V to 52V DC phantom power
UniGuard’ RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Integral UniSteep’ filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
RoHS compliant – free from all substances specified in the EU directive on hazardous substances
AT8138 MicroLine foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8″-27 to 3/8″-16 threaded adapter
Element: Fixed-charge back plate, permanently polarized condenser Polar Pattern: MicroLine’ Frequency Response: 30-20,000 Hz Low Frequency Roll Off: 80 Hz, 18 dB/octave Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa Impedance: 250 ohms Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D. Dynamic Range: 109 dB, 1 kHz at Max SPL Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa Phantom Power Requirements: 11-52V DC, 4 mA typical Weight: 108 g (3.8 oz) Dimensions: 316.3 mm (12.45″) long, 8.0 mm (0.31″) head diameter, 18.9 mm (0.74″) base diameter Output Connector: Integral 3-pin XLRM-type