£339.00 Inc VAT
652mm (25.69″) 90º pickup Microline Gooseneck Microphone with Mute Switch/LED
Equipped with Audio-Technica’s legendary electro-acoustic design innovations, the ES915SML is a wide-range miniature condenser microphone with a MicroLine polar pattern and a mute switch/LED.
This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations.
The ES915SML also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. A mute switch in the base lights when the mic is “on”. The microphone’s low-profile element provides a uniform MicroLine polar pattern with narrow 90º acceptance angle.
The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.
RoHS compliant – free from all substances specified in the EU directive on hazardous substances
The ES915SML is available in the following models and lengths: ES915SML12: 423.8 mm (16.69″) ES915SML18: 576.2 mm (22.69″)
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: MicroLine®
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -35 dB (17.7 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 133 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 109 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 70 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 4 mA typical
Weight: ES915SML12: 129 g (4.6 oz) ES915SML18: 139 g (4.9 oz)
Dimensions: ES915SML12: 423.8 mm (16.69″) long ES915SML18: 576.2 mm (22.69″) long, All: 8.0 mm (0.31″) head diameter, 18.9 mm (0.74″) base diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8138 MicroLine foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8″-27 to 3/8″-16 threaded adapter