Call Us: 01582 761122
Call Us: 01582 768844

Welcome to dmmusic.com

DM Installation Projects

the Church Audio Visual Specialists

My Basket

Basket £0.00

You have no items in your shopping basket.

AT829cW mic & AT8539 adapter Zoom

Audio Technica Basic Wired Lapel Mic

Be the first to review this product


  • Audio Technica AT829cW lapel mic and AT8539 phantom power adapter

  • Product bundle offers ready-to-go wired lapel mic 

  • Requires Phatom Power from mixer

  • Use with regular XLR mic lead

  • Compact and discreet microphone setup 

Availability: In stock

£159.00
Audio Technica

Buy with confidence via our secure payment facilities

Seen it at a lower price? Give us a call!

Need it installed? We are an installation company!

Call us for more info about this or any product on: 01582 761122


Share this:

Product Description

Details

Audio Technica Basic Wired Lapel Mic

Audio Technica AT829cW lapel mic and AT8539 phantom power adapter

  • Product bundle offers ready-to-go wired lapel mic 
  • Requires Phatom Power from mixer
  • Use with regular XLR mic lead
  • Compact and discreet microphone setup 



AT829cW lapel mic

  • General purpose, cardioid lapel microphone for the Audio Technica radio mic systems
  • Terminated with locking 4-pin HRS connector for A-T UniPak’ body-pack wireless transmitters.&nbsp
  • 55" (1.4 m) cable.


AT8539 power module

Allows any Audio-Technica Wireless Essentials® microphone to operate as a wired microphone.

The power module’s HRS-type 4-pin input connector mates with any Audio-Technica Wireless Essentials® (wireless microphone with model number ending in
a cW); its output is a standard 3-pin XLRM-type connector.

It offers a low-cut filter to help minimize the pickup of unwanted low frequencies.

To engage the low-cut filter, use the end tip of a paperclip or other small pointed instrument to slide the switch toward the “bent” line.

The power module is constructed of rugged steel for maximum durability and optimum shielding from hum. A snap-on belt clip is included. 

Additional Information

Additional Information

Manufacturer Audio Technica
Specification

AT829cW lapel mic
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 70-16,000 Hz
Open Circuit Sensitivity: -42.8 dBV (7.3mV) re 1V at 1 Pa
Signal to Noise Ratio: 67.1 dBA, 1 kHz at 1 Pa
Weight: 2.4g
Dimensions: 24mm long, 10.5mm diameter
Cable: 1.4 m long (permanently attached to microphone), terminated with HRS connector
Accessories: AT8131 foam windscreen; AT8434 clothing clip; 

AT8539 power module 
Input/Output connectors HRS-type 4-pin / XLRM-type
Frequency response Microphone dependent
Impedance 250 ohms
Low-cut filter 80 Hz, 18 dB/octave
Phantom power 11-52V DC, 2 mA typical
Switch Flat / Roll-off
Dimensions 97.6 mm (3.84") long , 18.9 mm (0.74") diameter
Accessory included Belt clip 

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.

You may also be interested in the following product(s)