£309.00 Inc VAT
305mm (12″) 120º Cardioid Condenser Gooseneck Microphone with Mute Switch/LED
Equipped with Audio-Technica’s legendary electro-acoustic design innovations, the ES915SC is a wide-range miniature condenser microphone with a cardioid polar pattern and a mute switch/LED. This small-diameter gooseneck microphone provides highly flexible positioning while maintaining a well-contoured appearance.
The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations. The ES915SC also offers an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise.
A mute switch in the base lights when the mic is “on”.
The microphone’s low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. The microphone can be mounted on a podium or desktop with the included AT8474 low-profile isolation mount, which attenuates noise, shock and vibration transmitted through the mounting surface.
Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
The ES915SC is available in the following models and lengths: ES915SC12: 304.8 mm (12.00″) ES915SC18: 457.2 mm (18.00″) ES915SC21: 533.4 mm (21.00″)
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 109 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requirements: 11-52V DC, 4 mA typical
Weight: ES915SC12: 125 g (4.4 oz) ES915SC18: 135 g (4.8 oz) ES915SC21: 140 g (4.9 oz)
Dimensions: ES915SC12: 304.8 mm (12.00″) long ES915SC18: 457.2 mm (18.00″) long ES915SC21: 533.4 mm (21.00″) long All: 8.4 mm (0.33″) head diameter, 18.9 mm (0.74″) base diameter
Output Connector: Integral 3-pin XLRM-type
Accessories: AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8″-27 to 3/8″-16 threaded adapter