Generic filters
Search in excerpt

Audio Technica ES943C

Discontinued

Wired Lapel Microphone

  • Cardioid capsule 120 degrees
  • Professional Broadcast quality mic
  • UniGuard RFI immunity
  • Interchangeable capsule options
Audio Technica
Tag: Categories: , , SKU: MI/CON/ATEC150

he ES943C is intended to be worn on the clothing for excellent, unobtrusive sound pickup. The microphone’s wide-range capability ensures clean, accurate reproduction with high intelligibility for speakers, singers and other performers. Its low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. It is equipped with an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone offers unsurpassed immunity from radio frequency interference thanks to Audio-Technica’s UniGuard® innovations.

  • Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
  • Small size and excellent response provide crisp, full-sounding voice pickup
  • Available interchangeable elements permit angle of acceptance from 100º to 360º
  • 55″ (1.4 m) permanently attached miniature cable connects to AT8538 power module via TA3F-type connector
  • Requires 11V to 52V DC phantom power
  • Superior off-axis rejection for maximum gain before feedback
  • UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
  • Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
  • Includes ESE-C cardioid capsule 120 Degree pickup angle
  • Element: Fixed-charge back plate, permanently polarized condenser
  • Polar Pattern: Cardioid
  • Frequency Response: 30-20,000 Hz
  • Low Frequency Roll Off: 80 Hz, 18 dB/octave
  • Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
  • Impedance: 250 ohms
  • Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
  • Dynamic Range: 109 dB, 1 kHz at Max SPL
  • Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
  • Phantom Power Requiremens: 11-52V DC, 2 mA typical
  • Switch: Flat, roll-off
  • Cable: 1.4 m (55″) long (permanently attached to microphone), 2.2 mm (0.09″) diameter, 2-conductor shielded cable, terminated with TA3F-type connector
  • Accessories: AT8110 foam windscreen; AT8460 clothing clip; AT8538 power module; belt clip

Brand

Audio Technica

Audio Technica

Reviews

There are no reviews yet.

Be the first to review “Audio Technica ES943C”

You may also like…