Call Us: 01582 761122
Call Us: 01582 768844

Welcome to

DM Installation Projects

the Church Audio Visual Specialists

My Basket

Basket £0.00

You have no items in your shopping basket.

Sennheiser e912 S Zoom

Sennheiser e912 S

Be the first to review this product

High-quality, pre-polarised condenser microphone

  • Half-cardioid pick-up pattern, acoustically optimized for picking up speech

  • Unobtrusive, flat design ideally suited for conference tables, altars and lecterns

  • On and off via an integrated membrane switch

  • Available in white, black or grey


Buy with confidence via our secure payment facilities

Seen it at a lower price? Give us a call!

Need it installed? We are an installation company!

Call us for more info about this or any product on: 01582 761122

Share this:

Product Description


Sennheiser e912 S

The e 912 S is a high-quality, pre-polarised condenser microphone with half-cardioid pick-up pattern, acoustically optimized for picking up speech. Due to its unobtrusive, flat design, it is ideally suited for use on conference tables, altars and lecterns.

The e 912 S can be switched on and off via an integrated membrane switch.


  • Programmable membrane switch
  • Very unobtrusive due to flat design
  • Extremely rugged sound inlet basket
  • Rubber damping plate on base
  • Mounting slots for mounting the microphone to table tops, lecterns, etc.
  • Gold-plated XLR connector
  • Integrated electronics (instead of in-line preamp)

An internal DIP switch bank provides the following features: on/off (factory preset), push-to-talk button (PTT), cough button (PTM) or permanently switched on (ON)
The frequency response curve can be changed via a second DIP switch bank: low cut, low and high boost (factory preset), low boost or linear (see e 912).
The e 912 S has been optimized for picking up speech at relatively short distances, while the sister model e 916 has been designed for instrument pick up. For this reason, the frequency response curve of the e 912 S differs from that of the e 912.
With the e 912 S, you can obtain the frequency response curve of the e 912 by setting the DIP switch to the position lin (linear).

Delivery Includes
Microphone e 912 S
User guide

Additional Information

Additional Information

Manufacturer Sennheiser

Transducer principle (Microphone) pre polarised condenser microphone
Pick-up pattern half-cardioid
Frequency response (microphone) 20 Hz - 20 kHz
Sensitivity in free field, no load (1kHz) 6 (10) mV/Pa Depending on adjusted frequency response curve.
Impedance < 100 Ohm
Min. terminating impedance 1 kOhm
Maximum sound pressure level (passiv) 134 dB SPL
Equivalent noise level 26 dB (A)
Equivalent noise level weighted as per CCIR 468-3 37 dB
Phantom powering P48
Current consumption 2,8 mA
Connector XLR-3
Weight 550 g
Dimensions 126.5 x 105 x 26.5 mm


Write Your Own Review

Only registered users can write reviews. Please, log in or register

Product Tags

Product Tags

Use spaces to separate tags. Use single quotes (') for phrases.