Generic filters
Search in excerpt

Australian Monitor MX81

Discontinued
  • 8 input mono mixer
  • XLR input switchable between mic and line level
  • /- 15dB gain trim control per input
  • Input 1 is switchable to be pre/post master
  • 24VDC or mains power operation
  • Optional remote VCA/Tone generator/ Muting boards available
  • Whisper quiet operation
  • Dual colour signal present indication LED per input
Australian Monitor
Tag: Category: SKU: MX/UNP/AM03

The Australian Monitor MX81 Mixer brings a range of new features to the AMIS standard 1RU mixer range. The MX81 mixer features the new Australian Monitor Standard (AMS) input section which has an XLR input switchable between microphone and line level, dual RCA line inputs (on the first six inputs only), signal present LED indication, individually switchable phantom power, and /- 15dB of gain trim and treble and bass controls available per input.

The MX81 also boast whisper quiet operation, four segment output level indication and balanced line output, record output and headphone outputs. The MX81 has 8 AMS inputs to 1 output and will operate via 110 or 220-240 VAC or 24VDC via an external 24 volt external power supply. Remote VCA volume control, tone generators and muting boards are also available for the MX81.

The Australian Monitor MX81 mixer is extremely versatile and represents excellent value for money.

Frequency Response 20Hz – 20kHz ( 0,-3dB)
Total Harmonic Distortion < 0.1% @ 1kHz
Signal To Noise Ratio > 90dB (all pots at centre position)
Crosstalk Between channels >70dB
Tone Controls Bass at 100Hz /- 12dB
Treble at 10kHz /- 12dB
Sensitivity (Trim in centre 0dB) Mic Sens 4.36mV, -45dBu
Line Sens 0.775V, 0dBu, Imp >100ohm
RCA 200mV, -12dBu, Imp 30kohm
Max Level in XLR mic -15dBu line 30dBu
RCA >30dBu
Max Level out 21dBu
Phantom Power 15V DC
Outputs Master Out Nominal Level 0dBu into 1kohm
Imp 100ohm
Mono Headphone Out Nom -6dB into 200ohm
Imp 10ohm
Mono Rec Out Nom -12dB into 10kohm
Imp 10kohm
Power Input AC: 230V/50Hz or 115V/60Hz, 3 pin IEC320-C14 connector;
DC: 24 Volts via 2.1mmx5.5mm DC socket
Power Consumption (max) 7 VA
Fuses Mains (115V) 120mA
Mains (230V) 63mA
Dimensions (H x W x D) 44 x 482 x 182mm (1.75” x 19” x 7.2”)
Shipping Dimensions (H x W x D) 90 x 505 x 270mm (3.5” x 19.9” x 10.6”)
Weight Net 2.75kg (6.1lb)
Shipping 3.75kg (8.3lb)

Brand

Australian Monitor

Australian Monitor

Reviews

There are no reviews yet.

Be the first to review “Australian Monitor MX81”

You may also like…