Generic filters
Search in excerpt

Audio Technica Pro 35cW

£169.00 Inc VAT

Miniature Cardioid Condenser Instrument Mic

  • For sax, toms, brass and percussion
  • Excels in high-SPL applications
  • Extended frequency response
  • Included UniMount® clip (gooseneck)
Audio Technica

Categories: , , SKU: MI/CON/ATEC61

Designed for sax, toms, brass, and percussion, the PRO 35 excels in high-SPL applications and is ideal for active stage performances. Its extended frequency response captures subtle nuances of the performance.

The included AT8418 UniMount® clip permits accurate positioning and provides shock resistance while protecting the element. The microphone’s cardioid polar pattern reduces pickup of sounds from the sides and rear, improving isolation of the desired sound source.

Available configurations:

PRO 35cW: 55″ (1.4 m) permanently attached miniature cable terminated with a locking 4-pin connector for use with Audio-Technica cW-style body-pack wireless transmitters.

PRO 35: 6′ (1.8 m) permanently attached miniature cable terminated with a TA3F connector for use with the included AT8538 phantom power only in-line power module (80 Hz high-pass filter).

Microphones
Element Fixed-charge back plate, permanently polarized condenser
Polar Pattern Cardioid
Frequency Response 50-15,000 Hz
Low Frequency Roll Off 80 Hz, 18 dB/octave (wired only)
Open Circuit Sensitivity -45 dB (5.6 mV) re 1V at 1 Pa
Maximum Input Sound Level 145 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range 115 dB, 1 kHz at Max SPL (wired only)
Signal-to-Noise Ratio 64 dB, 1 kHz at 1 Pa
Phantom Power Requirements 11-52V DC, 2 mA typical (wired only)
Switches Flat, roll-off (wired only)
Weight (microphone) 0.3 oz (8 g)
Weight (power module) 2.9 oz (81 g) (wired only)
Cable 6.0′ (1.8 m) long (permanently attached to microphone), 0.10″ (2.6 mm) diameter, 2-conductor, shielded cable
Dimensions (power module) 3.66″ (92.9 mm) long,0.74″ (18.9 mm) diameter (wired only)
Dimensions (microphone) 0.98″ (25.0 mm) long,
0.40″ (10.2 mm) diameter
Output Connector (power module) Integral 3-pin XLRM-type (wired only)
Accessories Included AT8418 UniMount® microphone instrument mount; AT8538 power module (wired only); soft protective pouch
Audio-Technica Case Style M12

Brand

Audio Technica

Audio Technica

Reviews

There are no reviews yet.

Be the first to review “Audio Technica Pro 35cW”

You may also like…