Lapel radio mic system - Pro lapel mic
UHF true diversity radio system with 10 selectable channels, frequency scanning and polit tone squelch. Includes Pro quality AT899cW omnidirectional lapel mic This is an ideal system as a step up from the very popular Audio Technica 700 radio systems range offering more selectable channels, true diversity reception and frequency scanning for quick and easy setup. It also comes complete with a rack mounting kit.

The 2000 Series is a 10-channel frequency-agile UHF wireless system designed to suit a variety of applications, including MI/live performance, fixed installation, public address, A/V rental houses and places of worship. It offers all the advantages of a high-quality, professional wireless system at an extremely affordable price.

Features
Serious advances in affordable professional wireless
Clear sound quality and rock-solid, dependable performance
Automatic frequency scanning finds an open channel at the touch of a button
All 10 user-switchable channels are compatible-for easy use with multiple systems; no confusing frequency groups
True Diversity operation selects the better signal from the two receiver sections, reducing dropouts
Tone Lock™ tone squelch system fights interference
Rugged metal half-rack receiver with soft-touch controls and LCD display featuring RF and AF metering
Balanced XLR and unbalanced 1/4" output jacks enable use with a wide variety of audio gear
Includes rack-mount kit and detachable UHF antennas
Ground-lift switch helps eliminate audible hum caused by ground loops between the sound system and receiver
AT899cW sub miniature omnidirectional condenser lapel mic for broadcast quality speech reproduction - 5mm diameter.

Specifications
* Operating Frequencies: UHF band
* 795.000 - 820.000 MHz (E Band) - UK
* Number of Channels: 10 total
* Frequency Stability: ±0.005%, Phase Lock Loop frequency control
* Modulation Mode: FM
* Normal Deviation: ±5 kHz
* Operating Range: 100 m typical
* Operating Temperature Range: 41° F (5° C) to 113° F (45° C)
* Frequency Response: 100 Hz to 15 kHz

Receiver Specifications
* Receiving System: Dual independent receivers, automatic-switching diversity
* Image Rejection: 55 dB nominal, 50 dB minimum
* Signal-to-noise Ratio: >100 dB at 40 kHz deviation (A-weighted), maximum modulation 40 kHz
* Total Harmonic Distortion: <=1% (10 kHz deviation at 1 kHz)
* Sensitivity: 20 dBµV (S/N 60 dB at 5 kHz deviation, IEC-weighted)
* Audio Output: Unbalanced: 25 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
* Balanced: 12.5 mV (at 1 kHz, ±5 kHz deviation, 100k ohm load)
* Output Connectors: Unbalanced: 1/4" TS ("mono") phone jack
* Balanced: XLRM-type
* Dimensions: 8.27" (210.0 mm) W x 1.73" (44.0 mm) Hx 6.39" (162.2 mm) D
* Weight: 2.2 lbs (1.0 kg)
* Accessories Included: Two flexible UHF antennas, rack-mount adapters, AC adapter

NOTE: If using rechargeable batteries we recommend Nickel Metal Hydride (NiMH) type.

AT899cW Subminiature Omnidirectional Condenser Lavalier Microphone.

Terminated with locking 4-pin connector for A-T UniPak™ body-pack wireless transmitters. 55" (1.4 m) cable. Includes AT899AK accessory kit.

Available in Beige or Black

Audio-Technica’s omnidirectional AT899 is engineered for intelligible, accurate voice reproduction. Its low-profile design (a mere 5 mm in diameter) assures minimum visibility. The mic may be worn as a lavalier and is easily hidden in clothing or hair. It offers the convenience of battery or phantom power; its switchable low-frequency roll-off reduces popping.

Features:

Maximum intelligibility and clean, accurate reproduction for vocalists, lecturers, stage and television talent, and houses of worship
Low-profile design (a mere 5 mm in diameter) is ideal for applications requiring minimum visibility
Operates on battery or phantom power
All wireless models available in either low-reflectance black or beige
Extensive array of provided accessories includes a clothing clip, viper clip, magnet clip and lanyard (black models only), windscreens, element covers, interchangeable single and double mic holders
Accessories available separately include complete accessory kits, clothing clips, three-pack element covers and three-pack windscreens
9.8' (3.0 m) cable permanently attached to mic, TA3F connector at power module
SPECIFICATIONS

ELEMENT Fixed-charge back plate, permanently polarized condenser
POLAR PATTERN Omnidirectional
FREQUENCY RESPONSE 20-20,000 Hz
LOW FREQUENCY ROLL-OFF 80 Hz, 12 dB/octave
OPEN CIRCUIT SENSITIVITY Phantom: -43 dB (7.0 mV) re 1V at 1 Pa Battery: -46 dB (5.0 mV) re 1V at 1 Pa
IMPEDANCE Phantom: 200 ohms Battery: 250 ohms
MAXIMUM INPUT SOUND LEVEL Phantom: 138 dB SPL, 1 kHz at 1% T.H.D. Battery: 116 dB SPL, 1 kHz at 1% T.H.D.
DYNAMIC RANGE (typical) Phantom: 108 dB, 1 kHz at Max SPL Battery: 86 dB, 1 kHz at Max SPL
SIGNAL-TO-NOISE RATIO 64 dB, 1 kHz at 1 Pa
PHANTOM POWER REQUIREMENTS 11-52V DC, 2 mA typical
BATTERY TYPE 1.5V AA/UM3
BATTERY CURRENT / LIFE 0.4 mA / 1200 hours typical (alkaline)
SWITCH Flat, roll-off (recessed)
WEIGHT (MICROPHONE) 0.02 oz (0.5 g)
WEIGHT (POWER MODULE) 3.6 oz (102 g)
DIMENSIONS (MICROPHONE) 0.63" (16.0 mm) long, 0.20" (5.0 mm) diameter
DIMENSIONS (POWER MODULE) 5.71" (145.0 mm) long, 0.83" (21.0 mm) diameter
OUTPUT CONNECTOR (POWER MODULE) Integral 3-pin XLRM-type
CABLE 9.8' (3.0 m) long (permanently attached to microphone), 0.08" (2.0 mm) diameter, 2-conductor, shielded cable with TA3F output connector that mates with TB3M jack on power module
ACCESSORIES FURNISHED AT8537 power module; AT8439 cable clip; clothing clip base; viper clip base; magnet clip base and plate with lanyard; three single mic holders; two double mic holders; two element covers; two windscreens; battery; protective carrying case
AUDIO-TECHNICA CASE STYLE M29