Video / Stereo Audio Transmitter (IR return)
Requires Kramer TP-10 to operate
The TP-9 and TP-10 are a twisted pair transmitter and receiver set for composite or s-Video (Y/C) signals and unbalanced analog stereo or S/PDIF digital audio signals. The TP-9 transmitter converts the video and audio to a twisted pair signal and the TP-10 converts the twisted pair signal back into video & audio signals.
Bandwidth - > 70MHz (-3db)
Audio - S/PDIF or unbalanced analog
IR Repeater - 2 IR emitter Outputs (TP-9) & 1 sensor (TP-10)
Twisted Pair Input/Outputs - RJ-45 connector
System Range - up to 100 meters (320')
Cable - UTP (unshielded twisted pair) such as CAT 5.
Level (Gain) & EQ (Peaking) Controls - TP-10
Compact Size - Part of the Kramer TOOLST family of compact, high quality and cost effective solutions

Specifications

INPUTS: 1 RJ-45 CAT-5 shielded connector (LINE IN)
OUTPUTS: 1 composite video 1Vpp/75O on a BNC connector; 1 s-Video 1Vpp/75O [Y], 0.3Vpp/75O [C] on a 4p connector; 1 S/PDIF (digital audio) on an RCA connector; 1 audio (analog audio) <8dBu on a 3.5mm mini connector;
MAX. OUTPUT LEVEL: VIDEO: 2.6V; AUDIO: 4.6Vpp
BANDWIDTH: VIDEO: >=70MHz/-3dB; AUDIO: 20Hz to 20kHz/0.1dB
NON-LINEARITY: <0.05%
DIFF. GAIN: <0.05%
DIFF. PHASE: 0.09Deg
S/N RATIO: VIDEO: >75dB RMS/5MHz weighted; AUDIO: >73dB
AUDIO CONVERSION SAMPLE RATE: 48kHz
AUDIO CONVERSION RESOLUTION: 24 bits
POWER SOURCE: 12VDC, 82mA
DIMENSIONS: 12cm x 6.95cm x 2.76cm (4.7" x 2.8" x 1.08") W, D, H
ACCESSORIES: Power Supply, 3.5mm to IR Emitter Control Cable (C-A35/IRE-10)
Applications

Studios, airports, offices and hospitals
ecurity and military applications
NOTE: The TP-10 Requires the TP-9 to operate