Ultra portable Pro PA system
2 Powered subs & 2 slim line-array tops
DSP controlled
High SPL and directionality system The is a high performance ultra-slimpowered two
way system designed for use with small to medium wavefront
systems, in both mobile and install applications. The
includes two KL12ma powered subwoofers and 2
KR100 1mt line array satellites.
features a 1000 watt 12" drive unit with magnet
structure and suspension engineered for maximum linear
excursion.

The ultra-light reflex cabinet is fitted with two pocket handles and
one 35mm pole mounting point for easy installation with every
satellite speaker on it. It features large area porting to reduce air noise.
ultra-slim satellite features a line array of 2" high
efficiency drive units with neodymiummagnet structure and suspensions
engineered for maximum linear excursion and minimum noise problems.
The ultra-strong chassis ensures high resistance and durability also with
hardest work conditions.

comprised of the KL12ma self-powered subwoofer with an additional DSP controlled powered output and 35mm pole adaptor designed for a KR100 ultra-slim line array satellite speaker, which contains 16 x 2" neodymium transducers in a strong 5.5 cm x 7 cm, 4.5 Kg stainless steel chassis. Due to the slim profile and minimum distance between drivers it reproduces the full vocal frequency range with clear intelligibility and excellent phase coherent 120° x 8° coverage. The 12" long-excursion speaker of the KL12ma sub section employs a neodymium magnet and 3" voice coil. The large ports are designed to be fully symmetrical to the speaker, which means the back loading on the driver is consistent and even, with no port air turbulence. The cabinet weighs a mere 13 Kg.

The triangle port construction provides excellent structural integrity and strength, effectively eliminating any box resonance. The overall system response is from 40 Hz to 19KHz with 124dB continuous and 130 dB peak output.

An internal DSP module provides control presets. The output can optionally be used to power the KL12 passive subwoofer. Dedicated software allows for remote control of the system from a PC.

Specifications

Acoustics
Speaker power handling 500(sub) + 250(sat) W(AES)
Max power 1000(sub) + 600(sat) W 1
Impedance 4O(sub) + 8O(sat)
Frequency range 40Hz - 19 KHz +/- 3dB (preset relating)
SPL 1W / 1mt 98.5 dB (sub) 98 dB (sat) 2
Maximum SPL 124dB continuous - 130 dB peak

Coverage
Horizontal 100°
Vertical 7°

Crossover
Type DSP controlled
Frequency 150 Hz

Transducers
Low frequency 1 x 12” Neodymium speakers with 3” voice coil
High frequency 16 x 2” Neodymium speakers with 0,75” voice coil

Audio Input
Connectors male + female parallel 3-pin balanced XLR
Wiring Pin1 = ground - Pin2 = hot - Pin3 = cold
Power Audio Output
Connector 4-pin Female Speakon
Wiring Pin1+= CH1+ Pin1= CH1- Pin2+= N.C. Pin2= N.C.
Remote control Input
Connectors 1 x female 8 poles RJ45

Power Input
Connectors 2 x PowerCon IN/OUT
Type 1 modules class D - DSP controlled
Subwoofer power 750 Watt 3 @4O
Satellite power output 750 Watt 3 @4O
Protection Dynamic limiter, over current, over temp, short circuits

AC power
Operating range 210 - 240 Vac 50Hz (Default)
100 - 120 Vac 60Hz (Selectable)
I. nom 3.6 A / 115 Vac - 2.2 A / 230 Vac
Minimum operation voltage 95 Vac - 195 Vac
Maximum operation voltage 125 Vac - 205 Vac
Max continuos and
burst current
Default 6A(>10 sec) - 12A (<1 sec)
Selectable 10A(>10 sec) - 20A (<1sec)

Physical
Dimensions KL12ma: 32.5 x 33.5 x 43.5 cm (12.91” x 13.19” x 17.13”)
KR100: 5.7 x 120.5 x 7.4 cm (2.17” x 47.44” x 2.91”)
Weight KL12ma: 15 Kg (33.07 lbs) KR100: 4.4 Kg (9.7 lbs)