Pro In-Ear-Monitor wireless radio system
1321 selectable UHF channels with automatic frequency scanning
Up to 16 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
LCD information display offers step-through menus for setting preferences
Available in Chan 38 and other licenced bands (no chan 70 option) The Audio-Technica M3 Wireless In-Ear Monitor System offers a full range of professional in-ear monitoring features, with a choice of 1321 UHF channels and easy-to-read LCD information displays on both transmitter and receiver for setting preferences.

NOTE this system is only available on LICENCEABLE radio mic channels so requires a licence from JFMG.co.uk.

Bands available include:
Band L: 575.000 - 608.000 MHz
Band M: 614.000 - 847.000 MHz
Band H1: 754.000 - 787.000 MHz

(please select channel preference when ordering)

The stereo Audio-Technica M3 system is equipped with Audio-Technica's versatile Personal Mix Control, which gives allows volume and mix control of two independent signals on stage, via controls on the M3R stereo body-pack receiver.

While up to 16 complete M3 systems may be used simultaneously, any number of M3R stereo receivers can operate on the same frequency with a single M3T stereo transmitter.

The M3T Stereo Transmitter is equipped with two XLR/1/4" combo input connectors into which users can connect line-level inputs (from a mixing console, for example). The M3T also offers a headphone output that allows you to monitor transmitter input signals directly.

Compare M2 and M3 IEM systems: http://www.audio-technica.com/cms/resource_library/files/b245fde48d72706e/iem_system_comparison.pdf


Audio-Technica M3 IEM main features include:

High-fidelity sound with clean, articulate mix allows performers to hear themselves clearly at lower volume
1321 selectable UHF channels with automatic frequency scanning
Up to 16 simultaneous systems per frequency band
Three receiver modes: Personal Mix, stereo, and mono
Personal Mix Control allows volume and mix control of two independent signals at the receiver
LCD information display offers step-through menus for setting preferences
XLR loop output (true pass-through) connects signal to mixing console, additional IEM system or recording device with no signal degradation
Adjustable squelch eliminates annoying static
Pilot tone protects against RF interference when transmitter is turned off
Multi-level limiter (defeatable) helps protect hearing from sudden peaks
Portable system is quick to load and set up
Reduces on-stage audio clutter for better overall mix & less feedback
Use any number of Stereo Receivers (with individual mixes) on the same frequency
Audio-Technica earphones with proprietary dynamic drivers offer full frequency response and outstanding isolation
Personal fit with 3 sizes of rubber eartips plus an ear-conforming foam tip
Selectable auxiliary input offers connection point for ambient microphone, click track, or other mic- or line-level input
M3 Components
EP3 Headphones
In-ear dynamic headphones offer high-fidelity sound and excellent isolation
M3T Stereo Transmitter
Wireless UHF transmitter (frequency-agile) offers LCD display and 1321 user-selectable frequencies
M3R Stereo Receiver
Personal Mix Control in a lightweight body-pack with backlit LCD display

OVERALL SYSTEM SPECIFICATIONS
Operating Frequencies Band E: 790.000 to 822.000 MHz, 1281 frequencies
Band F: 832.000 to 865.000 MHz, 1282 frequencies
Band L: 575.000 to 608.000 MHz, 1321 frequencies
Band M: 614.000 to 647.000 MHz, 1321 frequencies
Not all frequency bands available in all areas. Please check with local regulations.
Minimum Frequency Step 25 kHz
Modulation Mode FM stereo
Maximum Deviation ±40 kHz
Dynamic Range 90 dB (typical), A-weighted
Total Harmonic Distortion <1% at (1 kHz, ±20 kHz Deviation)
Operating Range 100 m (300'), typical
(Open range environment with no interfering signals.)

Operating Temperature Range -5° C (23° F) to +50° C (122° F)
(Battery performance may be reduced at very low temperatures.)

Frequency Response 60 Hz to 13 kHz (+/- 3 dB)
Simultaneous Use 16 channels per band (maximum recommended)
For assistance with multi-band operation or other frequency coordination issues, please contact you regional Audio-Technica customer service representative.

RECEIVER SPECIFICATIONS
Receiving System Double conversion superheterodyne
RF Sensitivity 20 dBuV (at 60 dB S/N ratio, 50 ohms termination)
Headphone Output Connector 3.5 mm TRS stereo phone jack
Headphone Output Power 65 mW (at 32 ohms)
Antenna Input SMA-type, 50 ohms
Aux Input Connector 3.5 mm TRS stereo phone jack
Batteries 2 x 1.5V AA (not included)
Battery Life 8 hours (alkaline)
Depending on battery type and use pattern
Dimensions 70.0 mm (2.76") W x
25.0 mm (0.98") D x
110.0 mm (4.33") H
Net Weight 133 g (4.7 oz), without batteries
Accessories Included EP3 earphone; flexible antenna


TRANSMITTER SPECIFICATIONS
RF Power Output 10 mW/50 mW (switchable), 50 ohms
Limited to 10 mW within 863 MHz to 865 MHz
Following national regulations
Spurious Emissions Following federal and national regulations
Input Connections XLRF-type/6.3 mm stereo (1/4") combination connector
Pin 1 and Sleeve: Ground
Pin 2 and Tip: Hot
Pin 3 and Ring: Cold
Maximum Input Level XLRF-type/6.3 mm stereo, (1/4") balanced: +26 dBu
6.3 mm (1/4") mono, unbalanced: +26 dBu
Loop Output Connector XLRM-type connector
Pin 1: Ground
Pin 2: Hot
Pin 3: Cold
Power Requirement 12-18V DC, 600 mA
Headphone Output Connector 6.3 mm (1/4") TRS stereo phone jack
Headphone Output Power 120 mW at 32 ohms
Antenna Connector BNC, 50 ohms
Dimensions 210.0 mm (8.30") W x
132.0 mm (5.20") D x
44.0 mm (1.70") H
Net Weight 930 g (32.8 oz), without accessories
Accessories Included AC adapter (country dependant); rack mount adapters; flexible antenna