Gooseneck condenser mic with integrated 3 pin XLR connector
197.3mm length, flexible arm
Ideal for lecterns, pulpits and desktop speech pickup
Mic capsule with Cardioid pickup pattern
'UniGuard' radio interference immunity (from modile phones etc)
Requires Phantom Power This super-compact, small-diameter gooseneck delivers flexible positioning with a sleek, low-profile appearance. The mic's low-profile element provides a uniform cardioid polar pattern with 120º acceptance angle. It is equipped with an 80 Hz low-cut UniSteep® filter that reduces pickup of low-frequency ambient noise. The microphone offers unsurpassed immunity from radio frequency interference thanks to UniGuard® innovations.

Designed for quality sound reinforcement, professional recording, television and other demanding sound pickup applications
Low-profile element provides uniform cardioid polar pattern with 120º acceptance angle
Unobtrusive design with an overall length of only 7.77" (197.3 mm)
Plugs into any standard XLRF-type connector, or direct mounts to 5/8"-27 stands using included thread-mount adapter
Included shock mount attenuates noise, shock and vibration transmitted through the mounting surface
Available interchangeable elements permit angle of acceptance from 90º to 360º
Small-diameter gooseneck permits highly flexible positioning while maintaining smooth, contoured appearance
Superior off-axis rejection for maximum gain before feedback
Requires 11V to 52V DC phantom power
UniGuard® RFI-shielding technology offers outstanding rejection of radio frequency interference (RFI)
Integral UniSteep® filter provides a steep low-frequency attenuation to improve sound pickup without affecting voice quality
RoHS compliant - free from all substances specified in the EU directive on hazardous substances

Specifications
Element: Fixed-charge back plate, permanently polarized condenser
Polar Pattern: Cardioid
Frequency Response: 30-20,000 Hz
Low Frequency Roll Off: 80 Hz, 18 dB/octave
Open Circuit Sensitivity: -40 dB (10.0 mV) re 1V at 1 Pa
Impedance: 250 ohms
Maximum Input Sound Level: 138 dB SPL, 1 kHz at 1% T.H.D.
Dynamic Range: 109 dB, 1 kHz at Max SPL
Signal to Noise Ratio: 65 dB, 1 kHz at 1 Pa
Phantom Power Requiremens: 11-52V DC, 4 mA typical
Switch: Flat, roll-off
Weight: 104 g (3.7 oz)
Dimensions: 197.3 mm (7.77") long, 8.4 mm (0.33") head diameter, 18.9 mm (0.74") base diameter
Output Connector: Integral 3-pin XLRM-type

Accessories
AT8109 two-stage foam windscreen; AT8474 universal isolation mount; AT8473 quick-mount stand adapter; 5/8"-27 to 3/8"-16 threaded adapter